






Tall Truck Cap — Maximum Height for Work & Play
Our tall truck cap gives you the extra vertical clearance you need when your gear won't fit under a standard cap. With a raised roofline engineered for full standing room inside the bed, this cap turns your truck into a mobile workshop or storage vault. We build every unit with welded aluminum frame construction and commercial-grade weatherproofing that holds up to jobsite abuse and weekend adventures alike.
Contractors love the ability to walk into the bed and organize tools without crouching. Outdoor enthusiasts appreciate the space for bikes, camping gear, and tall cargo that would otherwise require a trailer. The additional height doesn't compromise aerodynamics—our wind-tunnel-tested profile minimizes drag while maximizing your usable interior volume.
Height & capacity details

Height specifications and interior dimensions
The tall truck cap stands 72 inches from the bed floor to the interior ceiling, giving you ample clearance for ladders, PVC pipe bundles, fishing rods, and full-size mountain bikes. We measure the interior width at 62 inches between the sidewalls on an 8-foot bed model, with a tapered design that follows your truck’s natural bed contour.
Exterior height from the top of the bed rail to the cap peak is 38 inches, which maintains a reasonable overall vehicle height for garage clearance and drive-through access. The sloped front profile integrates cleanly with your cab roofline, and the rear taper improves rearward visibility through your mirrors. Weight distribution is balanced across the bed rails—our aluminum construction keeps the total cap weight under 280 pounds for the long-bed version, so your truck’s suspension and fuel economy stay in the acceptable range.

Construction materials and weatherproofing
We fabricate the frame from .063-inch marine-grade aluminum with TIG-welded corner joints that won’t crack under flex or impact. The exterior skin is .040-inch aluminum sheet, formed and bonded to the frame with industrial adhesive and pop rivets every six inches. Every seam gets a continuous bead of butyl sealant before assembly, then we apply a powder-coat finish in your choice of factory truck colors.
Sealing system
Weather stripping runs the full perimeter of the bed-rail interface, compressing against the truck bed for a watertight seal. The rear door uses a three-point latching system with compression bulb weatherstrip that prevents water intrusion even during pressure washing. Side doors feature rotary paddle latches with cam-action compression, and every window frame includes EPDM rubber gaskets that resist UV degradation and temperature extremes. We test every cap under simulated rain before it leaves the facility.
Door and window configuration
The rear door is a full barn-door setup with dual handles and a central lock cylinder keyed to match your truck. Internal support struts hold the door open at 90 degrees, giving you unobstructed access to the entire bed width. Each side features a sliding window door—the glass panel slides rearward on aluminum tracks, and a screen panel slides forward for ventilation without bugs.
Front sliding window matches the width of your cab’s rear slider, so you can pass tools or communicate with passengers without stepping out. All glass is tempered automotive-grade with a medium tint for privacy and UV protection. Hinges and latches are stainless steel to prevent rust, and we include interior release handles on both side doors for safety.



More height options for your truck bed
Rated 4.8 by verified buyers






Common questions about tall truck caps
Our tall truck cap offers 72 inches of interior clearance from the bed floor to the ceiling. That's enough standing room for most adults to move around comfortably inside the bed without crouching. The exterior profile adds 38 inches of height above your bed rails, which keeps your overall vehicle height manageable for most residential garages and commercial parking structures.
We manufacture tall truck caps with pre-drilled mounting rails for Ford F-150, F-250, F-350, Chevrolet Silverado 1500-3500, GMC Sierra 1500-3500, Ram 1500-3500, and Toyota Tundra models from 2015 forward. The cap is available in both 6.5-foot and 8-foot bed lengths. If you have a spray-in bedliner or aftermarket bed rail system, you may need to drill additional mounting holes—our installation guide includes templates and instructions for these scenarios.
The sloped front profile and tapered rear design minimize aerodynamic drag compared to a box-shaped cap. Most customers report a fuel economy decrease of 1 to 2 miles per gallon on the highway, which is comparable to standard-height caps. The aluminum construction keeps the weight under 280 pounds, so the impact on acceleration and braking is negligible. Wind noise at highway speeds is well controlled thanks to the weatherstripping and aerodynamic shaping.
Yes, the roof is reinforced to accept aftermarket ladder racks and crossbar systems rated up to 300 pounds static load. We offer factory-installed rack mounting points as an optional upgrade, or you can add universal clamp-on racks later. The aluminum skin is thick enough to support drilling for custom mounting, though we recommend using backing plates to distribute the load and prevent stress cracking over time.
Inspect the bed rail weatherstrip and door seals every six months for compression damage or cracking. Clean the seals with mild soap and water, then apply a silicone-based protectant to keep the rubber flexible. The butyl sealant in the seams is permanent and doesn't require maintenance. If you notice water intrusion around a door, the latch may need adjustment—loosen the striker plate screws, reposition for better compression, and retighten.
Our tall truck cap provides 72 inches of interior height, which suits most general-purpose cargo and allows standing room for average-height adults. The high-rise model extends to 84 inches interior height for specialized applications like transporting ATVs, large equipment, or creating a mobile workshop with shelving. High-rise caps are heavier and create more wind resistance, so they're best for users who truly need the extra vertical clearance rather than general-purpose hauling.
We stock replacement glass panels, door handles, latches, weatherstripping, and LED light assemblies for all current and legacy tall truck cap models. Most parts ship within two business days. If you damage a sidewall or roof panel, we can fabricate and finish a replacement section to match your existing cap—turnaround time is typically 10 to 15 business days depending on the complexity of the repair and your color match requirements.





