


High Rise Truck Cap – Extended Height for Work & Recreation
Our high rise truck cap transforms your pickup bed into a full-height workspace with standing headroom for most adults. The extended roofline adds 12-18 inches of vertical clearance compared to standard caps, making it easier to access tools, organize equipment, and work inside the bed without crouching. Contractors, electricians, plumbers, and mobile service professionals choose this cap when jobsite efficiency matters.
We build every high rise cap with the same aluminum or fiberglass construction found across our commercial lineup. Reinforced corner posts and cross bracing support the additional height without adding excessive weight. Full-perimeter weather sealing keeps moisture and dust out, even during highway travel or heavy rain.
High rise cap specifications

Construction & Materials
We manufacture high rise caps in both all-aluminum and fiberglass-over-aluminum frame configurations. The aluminum model uses .050-inch marine-grade sheet with welded seams and structural ribs running front to back. This construction keeps weight under 200 pounds on most six-and-a-half-foot beds while maintaining rigidity during highway speeds.
Fiberglass high rise caps feature a powder-coated aluminum frame wrapped in hand-laid composite panels. We finish these caps with automotive-grade paint matched to your truck’s factory color code. The composite shell resists minor impacts better than bare aluminum and accepts aftermarket graphics or vinyl wraps without special prep work. Both material options include the same locking mechanisms, window hardware, and mounting clamps.

Height Specifications & Interior Dimensions
Standard truck caps measure 20-24 inches tall at the centerline. Our high rise design extends that to 36-42 inches depending on bed length and mounting style. A six-foot adult can stand upright inside most configurations when the truck is parked on level ground. Actual headroom varies by truck model since bedside rail height differs between manufacturers.
Interior width between the sidewalls measures 48-50 inches on full-size beds. Front-to-back usable length matches your bed dimension minus four inches for the bulkhead and rear door frame. We include a reinforced aluminum floor pan or recommend a spray-in bedliner for increased durability under heavy foot traffic and tool storage.
Door & Window Configurations
Rear Access Options
Most high rise caps ship with a single rear locking door featuring a three-point paddle latch and weather stripping. Barn door configurations split the rear opening down the center for wider access when loading large equipment. Both styles accept our optional LED third brake light and backup camera integration.
Side Window Styles
Sliding side windows appear on both driver and passenger sides as standard equipment. Each window uses tempered safety glass in an aluminum frame with bug screens. You can upgrade to tinted glass or add front bulkhead slider windows for ventilation when working inside the cap. Some tradespeople request solid side panels instead of windows to maximize interior wall space for shelving and tool racks.



Premium Truck Caps with Extended Vertical Space
Rated 4.8 by verified buyers

Common Questions About High Rise Truck Caps
A high rise truck cap adds 12-18 inches of vertical clearance compared to standard height caps. Standard caps measure 20-24 inches at the centerline while high rise models extend to 36-42 inches. This allows most adults to stand upright inside the bed when the truck is parked. Exact dimensions vary by bed length and truck model since bedside rail heights differ between manufacturers.
You can expect a 1-2 MPG decrease in highway fuel economy due to increased aerodynamic drag from the taller profile. The impact is most noticeable at speeds above 65 MPH. Handling and stability remain unaffected since the cap's weight stays low and centered over the bed. Crosswinds may require minor steering correction compared to a standard cap, similar to driving with an empty trailer.
Yes, every high rise cap includes reinforced mounting points designed for aftermarket roof racks and ladder racks. The factory roof structure supports up to 300 pounds static load on aluminum models and 250 pounds on fiberglass versions. We provide attachment locations at four corners and two midpoints along each side rail. Always distribute weight evenly and follow the manufacturer's dynamic load ratings during highway travel.
We manufacture high rise caps for standard full-size pickup bed lengths including 5.5-foot, 6.5-foot, and 8-foot configurations. Each cap is custom-fit to your specific truck make, model, and year using application-specific mounting hardware. Mid-size trucks and compact pickups typically cannot accommodate high rise caps due to payload and structural limitations.
Wash the exterior with automotive soap and water every two weeks to prevent buildup that can degrade seals and paint. Inspect the perimeter gasket quarterly and apply silicone lubricant to maintain flexibility. Check all mounting clamp bolts twice per year and re-torque to specification if needed. Fiberglass caps benefit from waxing every six months. Clean window tracks and hinges with a dry brush to remove dust and debris that can interfere with operation.
The interior sidewalls and front bulkhead provide excellent mounting surfaces for shelving, tool racks, and storage bins. Most contractors install L-track systems or custom wooden shelves secured to the aluminum frame. We recommend consulting with our dealer network if you plan extensive modifications since improper weight distribution can stress the mounting clamps and affect the seal between cap and bed rails.
Interior LED lighting is available as a factory-installed option or can be added after purchase. The standard lighting package includes two dome lights wired to your truck's cargo light circuit. Upgraded packages add under-shelf task lighting and remote switches. Some customers install battery-powered magnetic LED strips as a simpler alternative that doesn't require wiring into the truck's electrical system.






