A.R.E. Ford F-350 Camper Shell product image
A.R.E. Ford F-350 Camper Shell product image

Ford F-350 Camper Shell | A.R.E. Truck Caps

★★★★★4.8· thousands of reviews

Our F-350 camper shell is engineered to handle the demands of Super Duty trucks. Built with reinforced aluminum framing and high-impact fiberglass composite panels, this camper shell delivers weathertight protection for your F-350 bed whether you're hauling equipment to a job site or loading gear for a weekend camping trip.

We designed this shell to fit 8-foot long beds on 2017-2024 F-350 models, with integrated mounting hardware that anchors directly to factory bed rails. The three-piece rear door system includes a locking handle and integrated gas struts for effortless lifting, while tinted sliding side windows provide ventilation without compromising security.

Find your local A.R.E. dealerView camper shell
01
Reinforced aluminum frame rated for Super Duty payload capacity
02
High-impact fiberglass composite shell with UV-resistant gel coat finish
03
Custom-fit design for F-350 8-foot long beds (2017-2024 models)
04
Three-piece rear door with dual compression latches and weatherstripping
At a glance

Built for Super Duty strength

Reinforced aluminum frame rated for Super Duty p
High-impact fiberglass composite shell with UV-r
Custom-fit design for F-350 8-foot long beds (20
Three-piece rear door with dual compression latc
Tinted sliding side windows with locking screens
Integrated LED dome light with door-activated sw
Construction built for Super Duty duty cycles
Product details

Construction built for Super Duty duty cycles

We build every F-350 camper shell with a reinforced aluminum frame that runs the full perimeter of the bed opening. This frame distributes load stress across multiple mounting points rather than concentrating weight on factory bed rails alone. The shell itself is molded from high-impact fiberglass composite layered over a foam core, creating a structure that absorbs vibration and resists cracking even when your truck is loaded to GVWR.

The gel coat finish is UV-stabilized and formulated to match the fade rate of Ford OEM paint, so your shell won’t turn chalky or discolored after years of sun exposure. We precision-cut each shell to match the cab profile of your specific F-350 year and trim level, eliminating the gaps and rattles common with universal-fit designs. The same attention to fit and finish that defines our F-250 camper shell lineup carries into every component we manufacture for Super Duty applications.

Rear door access and security
Sizing & fit

Rear door access and security

The three-piece rear door system gives you multiple access options depending on what you’re loading. The full tailgate-height center panel swings open on reinforced hinges rated for 75 pounds, while the upper lift glass is supported by twin gas struts that hold it open at any angle. Both sections lock independently using flush-mounted paddle handles keyed to match your F-350 ignition.

Dual compression latches on each door panel create a weathertight seal against EPDM rubber gaskets that we replace under warranty if they ever lose elasticity. When both doors are closed and latched, the shell meets IP65 dust and water ingress protection, keeping your cargo dry even during pressure washing or stream crossings. The rear glass panel is tempered safety glass with a factory tint that reduces interior heat buildup by up to 40% compared to clear glass.

Styling

Side window ventilation and storage access

Sliding window operation

Both driver and passenger side windows slide open on stainless steel tracks with a single-hand push motion. Each window locks in the closed position using a keyed cylinder that integrates with the same key you use for the rear doors. The sliding panels are dual-pane tempered glass with a factory tint that blocks 99% of UV rays while still allowing clear visibility of your cargo from outside.

Locking mesh screens deploy behind each window to provide airflow without leaving your gear exposed when you park overnight. The screen frames are aluminum with powder-coated finish and replaceable fiberglass mesh rated to withstand repeated opening cycles.

Side window ventilation and storage access
Side window ventilation and storage access
Side window ventilation and storage access

Complete the look

More Super Duty camper shells from A.R.E.


Customer reviews

Rated 4.8 by verified buyers

4.8
★★★★★
Based on verified reviews
See Options
“
Perfect fit on my 2022 F-350
I haul welding equipment for my business and needed something that could handle daily abuse. This shell fits tight against the cab with no gaps, and the rear door seals stay dry even after pressure washing. The paint match is perfect for my Antimatter Blue truck.
M
Mike T.
Verified buyer
★★★★★
“
Finally a shell that doesn't leak
I've tried three other brands on previous F-350s and they all leaked around the front corners. This A.R.E. shell has been bone dry through two Montana winters. The sliding windows are smooth and the screens actually keep bugs out.
R
Rachel K.
Verified buyer
★★★★★
“
Heavy duty construction shows
The aluminum frame is way beefier than the fiberglass-only shells I looked at. I loaded 900 pounds of generator and tools in the bed and the shell didn't flex at all. The rear door gas struts hold the glass open even in wind.
J
James R.
Verified buyer
★★★★★
“
Great for camping gear security
We camp year-round and needed lockable storage that wouldn't add a ton of weight. This shell keeps our sleeping bags and cooking gear dry and secure. The dome light is bright enough to find things at night without a flashlight.
L
Linda S.
Verified buyer
★★★★★
“
Professional install took 90 minutes
My dealer had the shell on and sealed in less than two hours. They did a water test afterward and showed me how to adjust the door latches if they ever need it. No drilling into my bed required with the clamp system.
D
David M.
Verified buyer
★★★★★
“
Paint has held up for three years
I was worried about the shell fading faster than my truck, but after three years in Arizona sun the Stone Gray paint still matches perfectly. No cracking around the door hinges or window frames either.
C
Carlos V.
Verified buyer
★★★★★

Good to know

Common questions about our F-350 camper shell

Yes, our F-350 camper shell fits any cab configuration as long as you have the 8-foot long bed. The shell is engineered to match the bed dimensions, not the cab style. We offer this same shell for 6.75-foot short beds on crew cab models as a separate SKU. Confirm your bed length by measuring from the inside of the bulkhead to the inside of the tailgate — an 8-foot bed measures 98 inches.

Our F-350 camper shell accepts aftermarket roof rack systems designed for fiberglass shells. The roof surface is reinforced with internal ribs spaced at 16-inch intervals to distribute rack load across the structure. We recommend rack systems that mount using through-bolt attachments rather than adhesive feet, and we suggest keeping total roof load under 150 pounds when the vehicle is moving. Consult your rack manufacturer's instructions for proper bolt length and sealing.

The shell uses eight C-channel clamps that slide into the factory bed rail channels running along both sides of your F-350 bed. Each clamp tightens with a stainless steel bolt and nylon lock nut, pulling the shell flange down against a foam rail seal. This system requires no drilling and can be removed if you ever need to take the shell off. Installation torque for mounting bolts is 15 foot-pounds to compress the seal without cracking the fiberglass flange.

Interior clearance at the front of the shell is 22 inches from the bed floor to the ceiling, tapering to 19 inches at the tailgate due to the aerodynamic roofline. This provides enough height for most toolboxes, coolers, and stacked gear while maintaining a low profile that doesn't significantly affect fuel economy. If you need full standing height, our high-rise camper shell models offer up to 32 inches of clearance.

We provide a lifetime warranty on the shell structure and all aluminum frame components against defects in materials and workmanship. The fiberglass panels are covered for five years against cracking or delamination. Paint finish carries a two-year warranty, while gel coat finish is covered for five years. Weatherstripping, latches, and gas struts have a three-year warranty. The warranty is transferable to a second owner if you sell your truck.

Yes, we offer custom color matching for any automotive paint code from any manufacturer. If you want to match an aftermarket bumper, toolbox, or custom wrap color, send us a paint code or physical sample and our paint shop can formulate a match. Custom colors require an additional fee and extend lead time by approximately two weeks. We'll send you a painted sample panel for approval before applying the finish to your full shell.

The complete F-350 camper shell weighs approximately 185 pounds including all glass, hardware, and mounting clamps. This weight sits entirely on the bed rails and does not reduce your payload capacity the way a tonneau cover or bed rack would. For reference, that's about 40 pounds heavier than a comparable F-150 shell due to the reinforced frame and thicker fiberglass required for Super Duty applications.

The collection
Explore our full camper shell collection
Find the right shell for your truck bed length and work style