






F-250 Camper Shell – Premium Truck Cap for Ford Super Duty
Our CX Series f250 camper shell transforms your Ford Super Duty into a secure, weather-sealed hauler for tools, gear, and cargo that demands protection. Engineered specifically for the F-250's heavy-duty bed dimensions, this cap integrates seamlessly with your truck's factory styling while adding lockable storage that keeps equipment safe on the job site or campground.
We build every unit with marine-grade aluminum framing and commercial-grade fiberglass, combining lightweight construction with the structural integrity your Super Duty deserves. The three-piece design allows for easier installation while maintaining a watertight seal that holds up through highway rain and dusty trail runs alike.
Built for Super Duty performance

Construction & Materials Built for Super Duty Standards
We engineer every F-250 camper shell with the understanding that Super Duty owners expect equipment that matches their truck’s capability. The CX Series uses a composite fiberglass shell molded in one continuous piece for the main body, eliminating seams where water infiltration typically occurs on lesser caps. Marine-grade aluminum extrusions form the internal frame, creating a structure that flexes with your truck bed during heavy hauling without cracking or separating at the joints.
Our gel coat finish process applies a UV-stabilized protective layer before the shell leaves our facility, giving you factory-quality color depth that resists chalking even after years of sun exposure. We coat the underside with a spray-in bedliner material that dampens road noise and prevents rust transfer from cargo contact. The side door frames use stainless steel hinge pins rather than plastic bushings, a detail that matters when you’re opening and closing access points multiple times per day on active work sites.

Sizing & Bed Compatibility for Ford F-250 Models
Standard Bed (6.75 ft)
Our standard-bed f250 camper shell fits 2017-2024 F-250 models with the 81-inch bed, the most common configuration among Super Duty buyers. We mold this version with a front bulkhead angle that matches Ford’s cab slope precisely, creating a continuous roofline without gaps. The shell sits flush on the bed rails using compression-loaded weatherstripping that adapts to minor variations in bed levelness.
Long Bed (8 ft)
For the 96-inch bed variant, we extend the shell’s midsection while maintaining identical door placement and rear-hatch geometry. This longer model includes an additional crossbar in the aluminum frame to prevent flex over the extended span. Both bed lengths accommodate Ford’s factory spray-in bedliner without modification, though we recommend removing aftermarket rail caps before installation to ensure proper sealing.
Security Features & Locking Systems
We equip every camper shell with three-point locking on both side doors and the rear hatch, using rotary latches that engage stainless steel strikers mounted to the shell frame. This isn’t the paddle-handle system found on economy caps—our latches require deliberate key engagement and resist prying attempts that would defeat simpler mechanisms. The key cylinders match across all access points, and we can key the cap to your Ford’s existing ignition key upon request during the ordering process.
Each side door includes a gas strut that holds it open at 90 degrees, preventing unexpected closure when you’re reaching for tools in windy conditions. The rear hatch uses a prop rod with three position settings, allowing partial opening when you need ventilation but want to maintain security at the lower bed level. We drill and tap mounting points for aftermarket alarm contacts if you’re integrating the cap into a whole-vehicle security system.



More A.R.E. Truck Caps for Ford Super Duty
Rated 4.8 by verified buyers






Common Questions About F-250 Camper Shells
Yes, our F-250 caps are designed to accommodate factory spray-in bedliners without modification. If your bedliner extends over the top of the bed rails, you'll need to trim it back approximately 1/4 inch to create a flat surface for the weatherstripping to seal against. We provide a template and detailed instructions for this step.
The shell sits on the bed rails using compression weatherstripping that adapts to the bedliner's thickness. Our clamp system distributes pressure evenly to prevent damage to the liner material while maintaining a watertight seal.
The standard-bed (6.75 ft) version weighs 185 pounds, while the long-bed (8 ft) model weighs 210 pounds. This weight includes the aluminum frame, fiberglass shell, all hardware, and pre-installed wiring for the interior LED lighting.
The composite construction keeps weight lower than steel-framed alternatives while maintaining structural strength for heavy cargo loads. Two people can safely lift and position the shell during installation without special equipment.
We offer factory paint matching for all current Ford Super Duty colors at the time of order. You'll provide your truck's paint code (found on the driver's door jamb sticker), and we apply automotive-grade paint with a UV-resistant clear coat during manufacturing.
The gel coat finish comes in several standard colors at no additional charge, but custom color matching incurs a fee and extends lead time by approximately two weeks. Both finish options carry our lifetime warranty against fading, cracking, or delamination under normal use.
Most F-250 owners report a 1-2 MPG improvement in highway fuel economy after installing our camper shell, as the cap creates a more aerodynamic profile than an open bed. The actual impact varies based on driving conditions, payload, and whether you're towing.
The CX Series design follows the cab roofline to minimize air turbulence, and the lightweight fiberglass construction adds minimal weight compared to the truck's overall mass. City driving typically shows negligible fuel economy change since aerodynamics matter less at lower speeds.
Yes, the CX Series shell includes reinforced mounting points designed for aftermarket roof rack systems. The fiberglass roof is rated to support 300 pounds of evenly distributed static weight, and we pre-install threaded inserts at standard rack spacing intervals.
We recommend rack systems specifically designed for truck caps rather than universal models, as they distribute load across the aluminum frame rather than stressing the fiberglass skin. You'll need to seal mounting bolt penetrations with the marine-grade sealant we include to maintain the shell's weatherproof integrity.
Every CX Series purchase includes the camper shell body, eight heavy-duty bed rail clamps with rubber pads, all necessary weatherstripping pre-installed, a complete LED interior lighting kit with wiring harness, a rear hatch prop rod, gas struts for both side doors, and a keyed lock set.
We also provide installation instructions, a weatherstrip adhesive tube for long-term maintenance, touch-up paint matching your shell color, and a one-year supply of silicone lubricant for the door seals. The limited lifetime warranty on structure and finish is included at no additional cost.
We recommend cleaning the weatherstripping quarterly with mild soap and water, then applying a thin coat of silicone spray lubricant to keep the rubber supple. Avoid petroleum-based products that can degrade the seal material over time.
Inspect the bed rail contact points annually and re-torque the clamps to 15 ft-lbs if needed, as settling can occur during the first year of use. If you notice water intrusion, check that debris hasn't accumulated between the weatherstrip and bed rail—compressed dirt or dried mud can create leak paths that disappear once cleaned.

