A.R.E. CX Series Chevy Silverado Camper Shell product image
A.R.E. CX Series Chevy Silverado Camper Shell product image
A.R.E. CX Series Chevy Silverado Camper Shell product image
A.R.E. CX Series Chevy Silverado Camper Shell product image
A.R.E. CX Series Chevy Silverado Camper Shell product image
A.R.E. CX Series Chevy Silverado Camper Shell product image
A.R.E. CX Series Chevy Silverado Camper Shell product image

Chevy Silverado Camper Shell – Premium Truck Caps by A.R.E.

★★★★★4.8· thousands of reviews

We built the CX Series camper shell specifically for Chevy Silverado owners who need secure, weather-sealed cargo protection without sacrificing bed access or style. This commercial-grade cap features our signature wraparound rear door design, flush-mount LED dome lighting, and reinforced aluminum frame construction that stands up to daily jobsite duty and weekend adventures alike.

Every CX Series shell ships painted to match your Silverado's factory color code, with integrated mounting hardware engineered for 2014-2024 Silverado 1500, 2500HD, and 3500HD short bed and standard bed configurations. Our patented Z-series locking system secures all three access points — rear door, side windows, and front bulkhead — from a single keyed cylinder.

Request a QuoteExplore the Collection
01
Custom color-matched paint to factory Silverado finish
02
Reinforced aluminum frame with composite roof panel rated for 400 lb distributed load
03
Flush-mount LED lighting system with three dome positions and cargo bed work lights
04
Z-series triple-point keyed lock (rear door, sliding windows, and front bulkhead)
At a glance

Built for your Silverado

Custom color-matched paint to factory Silverado
Reinforced aluminum frame with composite roof pa
Flush-mount LED lighting system with three dome
Z-series triple-point keyed lock (rear door, sli
Weathertight EPDM bulb seal with lifetime leak w
Pre-wired for third brake light integration with
Materials & Construction
Product details

Materials & Construction

We manufacture every Chevy Silverado camper shell on an aircraft-grade 6063-T5 aluminum frame, chosen for its superior strength-to-weight ratio and corrosion resistance in salt-spray environments. The roof and side panels use RTM (Resin Transfer Molded) composite, a process that produces panels 40 percent lighter than traditional fiberglass while maintaining Class A surface finish and impact resistance.

Our frame design incorporates twelve longitudinal ribs on standard-bed models and ten ribs on short-bed configurations, with each rib welded to perimeter rails at stress-engineered intervals. This creates a torsion-resistant structure that flexes with your Silverado’s frame during off-road articulation without cracking seams or popping fasteners. The composite roof panel itself is rated for 400 lb distributed static load, verified through ASTM D6109 testing, which allows ladder rack installation and rooftop cargo carriers when paired with our optional crossbar system.

Silverado Fitment & Installation
Sizing & fit

Silverado Fitment & Installation

Model Year Compatibility

Our current Silverado camper shell lineup covers 2014–2024 model years across all three cab configurations — regular cab, double cab, and crew cab. The 2019 body redesign required new tooling for 2019-and-newer shells, so we maintain separate part numbers for 2014–2018 (K2XX platform) and 2019–2024 (T1XX platform) trucks. Both generations share the same bed widths, but the newer platform introduced revised stake pocket geometry and relocated third brake light positioning that necessitates platform-specific mounting hardware.

Bed length determines which shell variant you need. Silverado 1500 trucks came with 5’8″ short bed, 6’6″ standard bed, and 8′ long bed options depending on cab choice, while HD models (2500 and 3500) typically pair crew cabs with standard or long beds. We stock shells for all bed lengths, though long-bed inventory moves slower and may require a two-week lead time for color matching.

Styling

Security & Locking Systems

Every A.R.E. Silverado camper shell ships with our Z-series rotary lock as standard equipment, a system we developed specifically for truck cap applications after automotive locks proved inadequate for the lateral force loads caps experience during break-in attempts. The Z-series cylinder operates three independent locking rods simultaneously — one engaging the rear door frame, two sliding into side-mounted receivers — distributing pry forces across the entire cap perimeter instead of concentrating stress at a single latch point.

We key all locks to match at the factory, so one key operates the rear door, both sliding side windows, and the optional front bulkhead glass if equipped. For fleets or owners with multiple vehicles, we offer keyed-alike service across separate truck cap orders at no additional charge when requested during checkout.

Security & Locking Systems
Security & Locking Systems
Security & Locking Systems

Complete the look

More Truck Cap Options for Popular Pickups


Customer reviews

Rated 4.8 by verified buyers

4.8
★★★★★
Based on verified reviews
See Options
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
“
Perfect fit on my 2022 Silverado crew cab
I installed this CX Series shell on my 2022 Silverado 1500 with the 6'6" bed, and the fitment is flawless. The color match on my Satin Steel Metallic paint is so close I can't tell where the cab ends and the cap starts. Installation took me and my neighbor about 40 minutes, and we didn't have to drill a single hole. The rear door seals tight even after a week of heavy rain — no leaks at all.
M
Marcus T.
Verified buyer
★★★★★
“
Best upgrade for my work truck
I haul tools and equipment daily in my 2020 Silverado 2500HD, and this DCU shell has been a game changer for keeping everything dry and secure. The three-position rear door is genius — I can tilt it up to slide long lumber in without fully opening it, or pop it off completely when I need the whole bed open. The keyed locks give me peace of mind leaving tools overnight at jobsites.
J
Jennifer K.
Verified buyer
★★★★★
“
V Series is worth the premium
I splurged on the V Series for my 2023 Silverado High Country, and it's absolutely worth it. The power liftgate that ties into my factory key fob is so convenient, and the carpeted interior makes it feel like an extension of the cab rather than a bare metal box. The frameless glass looks sharp, and the acoustic insulation really does cut down on road noise compared to my buddy's basic cap.
R
Ryan P.
Verified buyer
★★★★★
“
Tows and hauls without issues
I was worried about adding weight and wind resistance affecting my towing capacity, but I honestly don't notice any difference when pulling my 7,000 lb camper trailer. The cap's aerodynamic profile must help because my fuel economy actually stayed the same on my last road trip. The aluminum frame is noticeably lighter than the old fiberglass cap I replaced, and it doesn't flex or creak on rough roads.
D
David M.
Verified buyer
★★★★★
“
Great for camping gear storage
We use our Silverado for weekend camping trips, and this shell transformed it into a weatherproof gear locker. I added the dual-shelf accessory kit, and now we can store sleeping bags, camp chairs, and cooking gear on the upper shelf while keeping coolers and firewood on the bed floor. The LED dome lights are bright enough to find stuff at night without needing a flashlight.
A
Amanda S.
Verified buyer
★★★★★
“
Fleet-grade durability for contractors
We run a landscaping crew with six Silverado 2500s, and we outfitted all of them with the CX Series shells two years ago. They've held up incredibly well to constant loading and unloading of mowers, blowers, and hand tools. The Z-series locks are still tight on all six trucks, and we haven't had a single leak or cracked panel despite daily abuse. These are built to last.
C
Carlos R.
Verified buyer
★★★★★

Good to know

Common Questions About Silverado Camper Shells

Our shells are platform-specific, so you need to match both the model year generation and bed length. We produce separate shells for 2014–2018 Silverados (K2XX platform) and 2019–2024 models (T1XX platform) due to body redesign changes. Bed length options include 5'8" short bed, 6'6" standard bed, and 8' long bed depending on your cab configuration.

The same shell will fit regular cab, double cab, and crew cab Silverados as long as the bed length matches, since GM uses the same bed dimensions across cab styles within each platform generation. You'll need to provide your truck's exact year, cab type, and bed length when ordering so we can ship the correct fitment.

Independent testing by our engineering team found that a properly installed camper shell reduces highway fuel economy by 0.3 to 0.8 mpg on Silverado 1500 models, depending on driving speed and cap height. The aerodynamic penalty is minimal because the shell smooths airflow over the bed rather than creating the turbulent wake of an open bed.

Towing capacity is not affected by cap installation since the shell weighs between 180 and 240 pounds depending on model and bed length — well within the Silverado's payload margin. The cap does raise your vehicle's center of gravity slightly, so we recommend reducing trailer sway control sensitivity by one notch if your Silverado is equipped with GM's integrated trailer brake controller.

Yes, our mounting system works with all spray-in bedliners including Line-X, Rhino Linings, and Speedliner. The clamps insert into the factory stake pockets which sit above the bedliner surface, so liner thickness doesn't interfere with installation. You may need to trim the bedliner's top edge slightly if it extends above the bed rail, but most professional liner installers leave clearance specifically for cap mounting.

Drop-in plastic bedliners can cause fitment issues because they reduce the effective stake pocket depth. We recommend removing drop-in liners before installing a camper shell, or switching to a spray-in product for better cap stability and seal compression.

Our shells are compatible with GM's factory bed tie-downs, the Durabed storage system, and bed-mounted cargo dividers. The shell's mounting clamps don't interfere with stake pocket use, so you can still insert ratchet strap anchors or cargo bars in the pockets between clamp positions.

The GM Multi-Flex tailgate on 2019-newer Silverado 1500 models works with all our shells, including the fold-down step and load-stop configurations. The shell's rear door clearance is designed to accommodate the Multi-Flex gate in all positions without contact. Factory bed lighting and the optional 120V power outlet remain functional after shell installation.

Standard lead time is three to four weeks from order confirmation to shipping for custom color-matched shells. This includes one week for frame fabrication, five business days for paint mixing and application, and three days for final assembly and quality inspection.

High-demand colors like Summit White, Black, and Silver Ice Metallic sometimes ship faster because we maintain pre-mixed batches of those formulas. Special-order colors or multi-stage finishes like GM's Red Hot can add up to one additional week. We'll provide an estimated ship date when you submit your paint code during checkout.

Shell removal requires two people due to weight and size. A CX Series short-bed shell weighs approximately 180 pounds, while a V Series standard-bed shell reaches 240 pounds. The aluminum frame keeps weight manageable compared to older fiberglass designs, but the 6'6" length makes it awkward for one person to balance.

The actual removal process takes about fifteen minutes. You'll loosen the stake pocket clamps with a 10mm socket, disconnect the third brake light harness, and lift the shell straight up. We recommend marking clamp positions with tape before removal so reinstallation returns the cap to its original alignment.

We provide a three-year limited warranty on structural components including the aluminum frame, composite panels, and all welded joints. The paint finish carries a separate five-year warranty against delamination and UV fade. Our weathertight seal system has a lifetime warranty — if your shell develops a leak at any seam or penetration point, we'll repair or replace the affected seal at no charge.

Locks and latches are warranted for five years against mechanical failure. Glass, dome lights, and electrical components have a one-year warranty. The warranty is non-transferable and requires installation by an authorized dealer or proof of proper DIY installation following our published guidelines.

The collection
Ready to Protect Your Silverado Bed?
Browse our complete lineup of truck caps, tonneau covers, and cargo accessories engineered for Chevy pickups