A.R.E. DCU Tacoma Camper Shell product image
A.R.E. DCU Tacoma Camper Shell product image
A.R.E. DCU Tacoma Camper Shell product image
A.R.E. DCU Tacoma Camper Shell product image
A.R.E. DCU Tacoma Camper Shell product image
A.R.E. DCU Tacoma Camper Shell product image
A.R.E. DCU Tacoma Camper Shell product image

Toyota Tacoma Camper Shell – A.R.E. Truck Caps

★★★★★4.8· thousands of reviews

Our DCU camper shell is engineered specifically for the Toyota Tacoma bed, delivering a weather-sealed cargo solution that transitions from job site to campsite without compromise. We built this cap around the demands of Tacoma owners who need protected storage for tools, gear, and weekend expedition loads.

The DCU profile sits flush with your Tacoma's roofline, maintaining aerodynamics while adding over 40 cubic feet of dry storage. Our aluminum-reinforced fiberglass construction sheds trail debris and resists UV degradation season after season. Whether you're loading lumber for a renovation project or packing camping gear for a mountain retreat, this shell keeps your payload secure and out of sight.

Find Your Local DealerView Shell
01
Custom-fit mounting system for 2016+ Tacoma short and long bed models
02
Aluminum-reinforced fiberglass composite resists dents and corrosion
03
Front sliding window with tinted safety glass and slam-latch security
04
Integrated LED dome light with weatherproof switch
At a glance

Built for the Tacoma bed

Custom-fit mounting system for 2016+ Tacoma shor
Aluminum-reinforced fiberglass composite resists
Front sliding window with tinted safety glass an
Integrated LED dome light with weatherproof swit
Side lift-up windows with gas strut supports and
Factory-matched paint available for all Tacoma c
Materials & Construction
Product details

Materials & Construction

We manufacture every Tacoma camper shell from a fiberglass composite layup reinforced with aerospace-grade aluminum at stress points. This hybrid construction delivers the impact resistance Tacoma owners need on backcountry trails without adding unnecessary bed weight.

The outer gel coat is UV-stabilized and color-matched to your truck’s factory paint code, creating a seamless OEM appearance. Aluminum extrusions frame the rear door and side window openings, preventing flex and maintaining weathertight seals even after years of daily use. The integrated mounting rails bond directly to the fiberglass skin, distributing load forces across the entire perimeter rather than concentrating stress at individual clamp points.

Tacoma Bed Fit & Installation
Sizing & fit

Tacoma Bed Fit & Installation

The DCU camper shell is available in configurations for both the 60.5-inch short bed and 73.7-inch long bed on 2016-2024 Tacoma models. Our template-cut mounting rails align with factory bed stake pockets and use clamp assemblies that install without drilling into your truck bed.

Installation takes approximately 45 minutes with two people and basic hand tools. Each shell ships with vehicle-specific hardware, mounting instructions, and alignment shims calibrated for your exact model year. We recommend professional installation at an authorized A.R.E. dealer to ensure proper seal compression and warranty coverage.

Styling

Window & Access Options

Front Sliding Window

The front panel features a horizontal sliding window with tinted safety glass and a three-point locking mechanism. The slider provides cab-to-bed access for loading long items like fishing rods or lumber while maintaining a weathertight seal when closed.

Side Lift-Up Windows

Both side panels have lift-up windows supported by gas struts, allowing ventilation and cross-loading access. Each window locks independently with keyed cylinders that match your Tacoma’s door locks. The windows open to 90 degrees and hold position at any angle for controlled airflow.

Window & Access Options
Window & Access Options
Window & Access Options

Complete the look

Compatible Camper Shells for Other Trucks


Customer reviews

Rated 4.8 by verified buyers

4.8
★★★★★
Based on verified reviews
See Options
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
Customer photo
“
Perfect fit on my 2022 Tacoma
I installed this shell on my short bed Tacoma and the mounting system lined up perfectly with the bed rails. The paint match is flawless and the side windows give me easy access to gear without opening the rear door. We've taken it through rain and snow and everything inside stays bone dry.
M
Mike T.
Verified buyer
★★★★★
“
Turns my truck into a camper
I built a sleeping platform in the bed and this shell gives me enough headroom to sit up comfortably. The front slider lets me access stuff from the cab and the roof is strong enough that I mounted a roof rack for my kayaks. Great investment for weekend trips.
J
Jessica R.
Verified buyer
★★★★★
“
Solid construction for work and play
I use my Tacoma for construction work during the week and camping on weekends. This shell handles both jobs without issues. The locking windows keep my tools secure at job sites and the weatherstripping keeps dust out on dirt roads. Worth every penny.
C
Carlos M.
Verified buyer
★★★★★
“
Quality build, professional install recommended
The shell itself is very well made with tight seals and smooth-operating windows. I recommend having a dealer install it because getting the alignment right takes some patience. Once it's on correctly it looks like it came from the factory. No leaks after six months.
D
David K.
Verified buyer
★★★★☆
“
Better aerodynamics than I expected
I was worried about fuel economy but this low-profile shell actually improved my highway mileage slightly compared to driving with the bed empty. The front slider is incredibly convenient for grabbing things without walking around to the tailgate.
A
Amanda L.
Verified buyer
★★★★★
“
Holds up great in Colorado weather
We've had this shell through two Colorado winters and it's still in perfect condition. No cracks from temperature swings, no fading from the sun at altitude, and the seals still keep out moisture during snowstorms. The roof handles snow load without any flex.
B
Brian S.
Verified buyer
★★★★★

Good to know

Tacoma Camper Shell Questions

We manufacture separate versions for the Tacoma short bed (60.5 inches) and long bed (73.7 inches). When ordering, specify your exact bed length and model year to receive the correct shell. The mounting system is calibrated differently for each bed length to ensure proper alignment with factory stake pockets.

Both versions are available for 2016-2024 Tacoma models. Earlier generation Tacomas require different mounting templates due to bed rail design changes.

The DCU shell roof is reinforced to support aftermarket crossbar systems rated up to 165 pounds of distributed load, which accommodates most rooftop tents designed for truck applications. We recommend installing a crossbar system specifically rated for dynamic loads if you plan to sleep in a rooftop tent.

The roof includes pre-drilled mounting points with additional fiberglass reinforcement layers. Use stainless steel mounting hardware and apply thread sealant to maintain waterproof integrity at all bolt penetrations.

Provide your vehicle's paint code (located on the driver's door jamb placard) when ordering and we will spray your shell to match. Our paint process includes color-match verification, multiple base coats, and a urethane clear coat wet-sanded to your truck's gloss level.

Factory-matched paint is available for all current Tacoma colors including TRD Pro exclusive finishes. Textured bedliner-style finishes are also available if you prefer a matte appearance that hides scratches on trails.

Our mounting system uses clamp assemblies that attach to the bed rails without drilling into the bed floor or sides. The clamps slide into factory stake pockets and tighten against the bed rail using threaded hardware included with your shell.

Installation requires no permanent modifications to your Tacoma. If you remove the shell later, the truck bed returns to stock condition with no holes or marks.

Wash the exterior with automotive soap and water as you would your truck's paint. Wax the gel coat every three months to maintain UV protection and prevent oxidation. Inspect weatherstripping annually and apply silicone lubricant to keep seals pliable.

Lubricate all hinges, latches, and window mechanisms with white lithium grease twice per year. Check mounting clamp torque after the first month of use and re-tighten if needed. Avoid pressure washers directly on seals as high pressure can force water past weatherstripping.

The DCU shell includes an integrated LED dome light with a weatherproof switch pre-wired during manufacturing. The light connects to your Tacoma's cargo light circuit using a plug-in harness included with the shell.

For additional electrical accessories, we offer optional 12-volt power outlet kits that tap into your truck's bed lighting circuit. All wiring uses weatherproof connectors and marine-grade wire rated for outdoor use.

The short bed DCU shell weighs approximately 180 pounds and the long bed version weighs 210 pounds. The fiberglass composite construction keeps weight lower than comparable aluminum caps while maintaining structural strength.

Two people can safely lift and position the shell during installation. The weight distributes evenly across the bed rails and does not significantly affect your Tacoma's payload capacity or towing performance.

The collection
Explore All A.R.E. Camper Shells
Custom-fit caps for every truck make and model