






Aluminum Truck Toppers | A.R.E. Caps
Our aluminum truck toppers deliver rugged performance without the weight penalty of traditional caps. Each unit is engineered with marine-grade aluminum frames and panels that resist corrosion in snow, salt, and coastal environments.
We designed these toppers for contractors, outdoor enthusiasts, and daily drivers who need secure cargo protection year-round. The anodized aluminum finish maintains its appearance through decades of use, and the extruded-aluminum frame distributes load stress across the entire structure. Every topper ships with stainless-steel hardware and heavy-duty latches that operate smoothly even in freezing conditions.
Weight savings matter when towing or hauling heavy loads. Our aluminum construction cuts 30-40% off the mass of comparable fiberglass models, improving fuel economy and preserving your truck’s payload capacity.
Aluminum construction highlights

Materials & Construction
We build every aluminum topper frame from extruded 6061-T6 aluminum alloy, the same material aircraft manufacturers specify for structural components. Panels use .080-inch sheet aluminum with a two-stage anodizing process that bonds a protective oxide layer directly to the metal surface.
The frame’s tubular extrusion design creates internal channels that house wiring for optional lighting packages and provide reinforcement at high-stress mounting points. Corner joints use through-bolted gussets rather than welded seams, allowing the frame to flex slightly during off-road use without cracking. Our powdercoat topcoat is applied over the anodized base for dual-layer protection against UV degradation and road chemicals.

Sizing & Truck Compatibility
Bed Length Options
We manufacture aluminum truck toppers for 5.5-foot, 6.5-foot, and 8-foot truck beds across all major manufacturers. Each model uses a custom-formed base rail that matches your truck’s bed profile, eliminating gaps at the cab and tailgate.
Height Configurations
Standard-height models sit flush with the cab roofline, maintaining aerodynamic efficiency and factory appearance. High-rise variants add 12 inches of interior clearance for taller cargo or standing-height access in full-size truck beds. Our engineering team creates dedicated molds for each truck generation, so a 2023 Ford F-150 topper accounts for bed rail contours and stake pocket positions specific to that model year.
Installation & Mounting System
Our clamp-based mounting system installs without drilling into your truck bed. Eight heavy-duty C-clamps attach to the bed rail, with rubberized contact pads that protect the paint and distribute clamping force across a two-inch contact area.
Installation takes two people approximately 45 minutes with basic hand tools. We include a torque wrench adapter to ensure all clamp bolts reach the specified 18 ft-lbs of tension. The topper’s base rail features adjustable shims at four corners, allowing you to level the unit even if your truck bed has minor irregularities from previous cargo damage.



More aluminum cap models engineered for your truck
Rated 4.8 by verified buyers





Common questions about our aluminum toppers
Our aluminum toppers weigh 30-40% less than fiberglass caps of equivalent size. A standard 6.5-foot aluminum topper for a full-size truck weighs approximately 180-200 pounds, while a comparable fiberglass unit typically weighs 280-320 pounds.
The weight difference becomes significant when you factor in payload capacity and fuel efficiency. Lighter toppers leave more room in your truck’s maximum payload rating for cargo, and reduced mass improves acceleration and braking performance.
Marine-grade aluminum resists impact damage differently than fiberglass. While fiberglass can crack or spiderweb from a single sharp impact, aluminum dents locally without spreading damage to surrounding areas. Minor dents in aluminum panels can often be tapped out from the inside, whereas fiberglass cracks require complete panel replacement.
Our .080-inch aluminum panels with internal frame reinforcement have proven highly resistant to denting in real-world use. The tubular frame structure distributes impact forces across multiple points rather than concentrating stress in one area.
We include rubberized isolation pads at every point where the aluminum topper contacts your truck’s steel bed rail. These pads create a physical barrier that prevents direct metal-to-metal contact between dissimilar metals.
All mounting hardware uses stainless steel rather than plain steel fasteners, eliminating the galvanic cell that causes accelerated corrosion. The clamp system’s design ensures that moisture cannot pool at contact points where it might otherwise create an electrolytic environment.
Yes, our anodized aluminum surface accepts automotive paint and vinyl wraps. For paint, you’ll need to scuff the anodized layer with 320-grit sandpaper and apply an etching primer before your color coats. Most body shops familiar with aluminum boat painting can handle this process.
Vinyl wraps adhere directly to the anodized surface without primer. We recommend cast vinyl rather than calendared material for long-term durability, especially if your truck sees frequent sun exposure in southern climates.
Wash the topper with car wash soap and water every 4-6 weeks to remove road salt and environmental contaminants. Avoid alkaline cleaners or truck wash chemicals above pH 10, as these can etch the anodized finish over time.
Lubricate all hinges and latches with silicone spray every six months. Check clamp tension annually and re-torque to 18 ft-lbs if needed. The weatherstripping should be inspected yearly and replaced if you notice any hardening or cracking, though our EPDM rubber typically lasts 8-10 years before replacement becomes necessary.
Our aluminum toppers install over spray-in bed liners and drop-in liners without modification. The clamp system grips the bed rail itself rather than the liner material, so liner thickness doesn’t affect installation.
Tonneau covers must be removed before installing a topper, as both accessories occupy the same bed rail mounting points. If you want the flexibility to switch between covered and open bed configurations, consider our retractable tonneau cover that installs at the bulkhead and retracts completely when not in use.
Our two-stage anodizing process creates a finish that typically maintains its appearance for 15-20 years with regular washing. The anodized layer is part of the aluminum itself rather than a coating that can peel or flake, so it won’t separate from the base metal.
UV exposure gradually lightens anodized colors over decades, but the protective properties remain intact. We’ve seen 25-year-old aluminum toppers still in service with original finishes that show weathering but no structural corrosion.




