






Aluminum Pickup Truck Caps | A.R.E. Official Store
Our DCU aluminum pickup truck cap delivers commercial-grade durability in a weight-conscious design that won't bog down your fuel economy or payload ratings. We build every DCU frame from extruded aluminum reinforced at stress points, then finish it with a powder-coated surface that shrugs off road salt, UV exposure, and the kind of abuse work trucks see daily.
The locking rotary latches tie directly into your OEM tailgate lock, so you're not juggling extra keys on the job site. Tinted safety glass on three sides keeps cargo out of sight while side sliding windows deliver ventilation when you're hauling gear that needs airflow. Whether you're securing tools overnight or protecting equipment through a cross-country haul, the DCU gives you a rust-free cap that outlasts the truck beneath it.
Aluminum cap construction highlights

Why aluminum beats fiberglass for work-truck longevity
We switched our commercial-fleet clients to aluminum caps years ago because the math on total cost of ownership tilts heavily in aluminum’s favor once you factor in replacement cycles. A fiberglass cap might cost less up front, but thegelcoat cracks after five winters of freeze-thaw cycles, the seams start weeping when UV breaks down the resin, and you’re shopping for a replacement while the aluminum owner is still running the original.
Aluminum doesn’t oxidize the way steel does, so there’s no rust creep starting at the mounting bolts and spreading through the bed rails. The powder coat we apply acts as a secondary barrier, but even if you chip it loading plywood, the bare aluminum beneath forms a protective oxide layer on contact with air. For operators in coastal zones or snow-belt states where road salt is a year-round reality, that corrosion resistance translates to caps that look presentable and seal properly a decade into service. The fiberglass truck bed cap category still has its place for owners prioritizing paint-match aesthetics, but aluminum is the pragmatic choice when the truck earns its keep.

Weight savings that protect your payload rating
How much lighter is aluminum?
A full-size DCU aluminum cap weighs roughly 180 pounds fully assembled, compared to 240-plus pounds for an equivalent fiberglass model. That 60-pound difference might not sound dramatic until you’re spec’ing a fleet of half-ton trucks already close to their GVWR when loaded with tools and materials. Every pound the cap doesn’t weigh is a pound you can legally haul, and over the course of a year that adds up to extra trips, fewer overweight citations, and better fuel economy on highway runs.
The weight advantage also matters for solo installation. One person can lift an aluminum cap onto a short-bed truck with a step stool and some patience, whereas fiberglass caps in the same size category usually require two people and a lot of awkward shuffling. We’ve seen contractors swap caps between trucks in the field to consolidate gear at the end of a job, something that’s only practical when the cap is light enough to maneuver without a forklift.
Rotary latch integration with your OEM tailgate lock
The DCU uses rotary paddle latches mounted at the rear corners that synchronize with your truck’s factory tailgate lock cylinder. Turn the key in your tailgate and both the tailgate and the cap rear door release simultaneously, so you’re not digging for a second key every time you need to access the bed. This isn’t a universal feature across all cap brands — some competitors use separate keyed cam locks or push-button latches that operate independently, which means more keys on your ring and more opportunities to get locked out when you lose one.
We run a stainless-steel rod linkage from each latch to the tailgate lock mechanism, and the whole assembly is sealed against moisture with rubber grommets at every pass-through point. In cold climates where locks freeze, you only have to treat one cylinder with de-icer instead of three separate locks. The system also means you can upgrade your truck’s tailgate lock to a higher-security cylinder and the cap will inherit that same security level automatically.



More aluminum cap options for your truck
Rated 4.8 by verified buyers






Common questions about A.R.E. aluminum truck caps
Aluminum will dent if you hit it with enough force, but it won't crack or shatter the way fiberglass does. A dent in aluminum is a cosmetic issue you can often pop out or live with, whereas a crack in fiberglass compromises the structural integrity and usually requires panel replacement. For work trucks that see regular abuse, we find aluminum's damage pattern is more forgiving long-term.
The extruded frame members are thick enough that normal job-site contact — bumping a ladder, brushing a tree branch — won't leave permanent deformation. The flat roof panel is the most vulnerable area, but we reinforce it with cross braces every 16 inches to distribute impact loads.
Yes, but you'll need to use a paint system designed for bare aluminum or powder-coated surfaces. Standard automotive primer won't adhere properly to powder coat, so most body shops will scuff the existing finish with 220-grit sandpaper, apply an etching primer, then shoot your color match and clear coat on top. The process adds a few hundred dollars to the cost compared to leaving it in the standard black or white powder coat we ship.
Some customers prefer to wrap the cap in vinyl instead of painting, which gives you color-match results without the permanent commitment. Vinyl also protects the underlying powder coat from UV damage, and you can peel it off if you sell the truck and want to return the cap to stock appearance.
Powder coating is electrostatically applied as a dry powder, then cured at high temperature to form a hard shell that's chemically bonded to the aluminum. It's thicker than wet paint — typically 3 to 5 mils compared to 1.5 to 2 mils for automotive paint — which gives it better impact resistance and UV protection. You won't see the micro-cracking or fade that shows up on painted caps after a few years of sun exposure.
The downside is that powder coat comes in a limited color palette, mostly blacks, whites, and grays. If you need a specific OEM color match, you'll have to repaint over the powder coat. But for customers who don't care about perfect color coordination, the powder coat will outlast any wet paint system we've tested.
A well-maintained cap generally increases resale value for work trucks and decreases it slightly for personal-use trucks, based on what we hear from dealers who take trade-ins. Buyers shopping for a work truck see a cap as a value-add that protects the bed and keeps tools secure, while buyers looking for a daily driver or weekend toy often view it as an accessory they'll need to remove.
Aluminum caps hold their value better than fiberglass during resale because they age more gracefully. A ten-year-old aluminum cap still looks presentable, whereas a ten-year-old fiberglass cap often shows crazing, discoloration, or stress cracks that make the whole truck look neglected. If you're planning to sell the truck within a few years, keeping the original clamps and hardware makes the cap easy to remove and sell separately.
No, aluminum caps handle winter conditions without removal. Ice and snow will accumulate on the roof just like they do on the cab, but the powder-coated surface doesn't hold moisture the way a porous fiberglass gelcoat does, so you won't see the freeze-thaw damage that causes fiberglass to delaminate. The rotary latches and gas struts are all rated for sub-zero operation, and we pack the hinge points with marine-grade grease that won't stiffen in cold weather.
The one maintenance item to watch in winter is the tailgate lock cylinder. Since the cap latches tie into that lock, a frozen cylinder will prevent you from opening both the tailgate and the cap. Keep a tube of lock de-icer in the cab and treat the cylinder after any ice storm, or upgrade to a heated lock cylinder if your truck didn't come with one from the factory.
The DCU supports aftermarket racks through the optional track system we offer as an add-on. We mill T-slot channels into the roof skin during fabrication, and you bolt the rack crossbars directly into those channels using stainless hardware. The aluminum roof is reinforced under each track with a 1/8-inch backing plate to spread the load, so you can safely carry 300 pounds of ladder or equipment without deforming the panel.
If you order the cap without the track option, you can still retrofit tracks later by drilling and riveting them in place, but it's easier to specify tracks at the time of purchase so we can install them before powder coating. Some customers skip the tracks and use suction-cup or clamp-style racks, which work fine for light loads but won't handle the abuse of daily ladder transport.
Our limited lifetime warranty covers the aluminum frame structure against rust-through, corrosion perforation, and structural failure for as long as you own the truck. That includes the extruded side rails, corner posts, and roof frame members, but excludes wear items like latches, hinges, gas struts, and glass, which carry a three-year warranty from the date of purchase. The powder coat finish is covered for five years against peeling, flaking, or UV fade under normal use.
The warranty is non-transferable, so if you sell the truck with the cap installed, the new owner doesn't inherit the coverage. We'll repair or replace any warrantied component at our discretion, and we cover parts but not labor for warranty claims after the first year. Damage from accidents, misuse, or modifications voids the warranty, so if you cut into the frame to fit a custom rack or drill extra holes for wiring, you're on your own for any issues that arise from those changes.



