



A.R.E. MX Series Truck Cap | Professional-Grade Aluminum Design
The A.R.E. MX represents our commitment to lightweight strength without compromise. We engineered this cap around an all-aluminum frame and panels, reducing weight by up to 40% compared to fiberglass alternatives while maintaining the structural integrity professionals demand. The MX fits full-size pickups from Ford, Chevrolet, GMC, RAM, and Toyota, with custom mounting systems that integrate directly with factory bed rails.
Every MX Series cap ships with our Tuf-Lok rotary latches, bulb-style weather seals that create a dust-tight perimeter, and tinted safety glass on all four sides. We designed the rear door to open with one hand while the internal gas struts hold it at any angle, making loading in tight garages or under low clearances significantly easier. The powder-coated aluminum surface resists rust in coastal and snow-belt climates where steel frames corrode within three seasons.
MX Series Construction & Design Details

Aluminum Frame Engineering & Weight Reduction
We built the MX Series around extruded aluminum rails that form a perimeter cage, then bonded aluminum skin panels to that frame using aerospace-grade adhesive and mechanical fasteners. This hybrid assembly method eliminates the flex common in rivet-only designs while keeping total weight between 140 and 180 pounds depending on bed length — roughly half what a comparable fiberglass cap weighs.
The weight savings translate directly to payload capacity. If your truck’s GVWR limits you to 1,800 pounds of cargo, an MX cap consumes only 150 pounds of that budget compared to 280-320 pounds for fiberglass. That extra margin matters when you’re hauling tools, materials, or equipment daily. The aluminum construction also improves fuel economy slightly; our internal testing with a Ford F-150 showed a 0.4 MPG improvement over the same truck with a fiberglass shell, measured over 5,000 mixed-use miles.

Security Hardware & Locking Systems
Every MX Series cap uses our Tuf-Lok rotary latches — a three-point system with locks at the rear door’s left, right, and top edges. Each lock cylinder is keyed to match your truck’s ignition key when you provide the key code at time of order, eliminating the need for separate cap keys. The rotary mechanism engages a steel striker plate bonded to the bed rail, creating 600 pounds of pull resistance per latch point.
The side windows use flush-mount slam latches with internal compression springs. Push the window closed and the latch automatically seats; there’s no fumbling with exterior handles in the rain. We added a keyed lock to the driver-side sliding window, giving you a quick-access entry point without opening the rear door. That sliding panel opens 18 inches — wide enough to reach a toolbox or grab a jacket without walking to the tailgate.
Window Configuration & Ventilation
The standard MX Series includes tinted safety glass on both sides, the rear door, and a sliding front panel. The side glass is fixed in place with bulb seals and urethane adhesive — the same method truck manufacturers use for cab windows. We laser-cut the aluminum frames to accept the glass with zero gaps, then apply a continuous bead of weather seal that compresses when you close the door.
The front sliding window provides passive ventilation when you’re parked. Crack it open two inches and airflow pulls through the bed without creating wind noise at highway speeds. We tested this configuration at 75 MPH on our in-house wind simulator and measured no detectable whistling or buffeting. The sliding panel locks in the closed position with a spring-loaded detent, preventing it from rattling loose on rough roads.



Other A.R.E. Professional Truck Cap Series
Rated 4.8 by verified buyers


Common Questions About the MX Series
The MX uses an all-aluminum frame and panels instead of fiberglass composite construction. This cuts the cap’s weight by 40-50% while maintaining the same structural strength and security features. Aluminum also resists rust and corrosion in climates where fiberglass caps develop stress cracks or gelcoat failure. The weight savings translate directly to increased payload capacity — an MX cap typically weighs 140-180 pounds compared to 280-320 pounds for a similar-sized fiberglass model.
The MX uses our Universal Mounting System with C-channel clamps that slide into the cap’s base rail and tighten against your truck’s factory bed rail flanges. Most 2015-newer trucks require no drilling — the clamps engage the existing stake pocket openings and torque down to 18 ft-lbs. Older models with welded stake pockets may need four 1/4-inch mounting holes drilled through the bed rail. Complete installation hardware and a drilling template are included with every cap.
We stock 14 standard powder coat colors that match OEM finishes from Ford, Chevrolet, GMC, RAM, and Toyota. If your truck’s color isn’t in our standard palette, we offer custom color matching for an additional fee. Provide your paint code at time of order and we’ll mix a powder coat formula that matches within one shade variation. The powder coat finish provides better chip resistance and UV fade protection than wet paint.
Yes, the MX base rail is 2.5 inches wide and clears spray-in liners up to 1/4 inch thick. The mounting clamps sit on top of the liner and engage the bed rail directly, so the liner doesn’t interfere with installation. Drop-in plastic liners require removing the liner’s upper rail caps so the MX clamps can access the bed rail. If your liner covers the stake pockets, you may need to trim small notches to expose the mounting points.
The MX Series includes a limited lifetime warranty on the aluminum frame and panels against structural defects, rust-through, and manufacturing flaws. The powder coat finish, weather seals, locks, and glass carry a three-year warranty from the date of purchase. The warranty transfers to subsequent owners as long as you provide proof of purchase and the cap remains on the original truck model it was fitted for. Warranty claims require inspection by an authorized A.R.E. dealer.
Weight varies by bed length: short bed (5.5-6 feet) MX caps weigh approximately 140-150 pounds, standard bed (6.5-7 feet) models weigh 160-170 pounds, and long bed (8 feet) versions weigh 175-185 pounds. These weights include all glass, hardware, weather seals, and locks. By comparison, a fiberglass cap of the same size typically weighs 280-320 pounds. The aluminum construction delivers significant weight savings without compromising structural integrity or security.
Yes, the MX roof supports aftermarket rack systems designed for truck caps. The aluminum roof panel is reinforced with internal cross-braces that distribute load across the frame rails, providing mounting points for track-style or tower-based rack systems. We recommend racks with a maximum static load rating of 200 pounds. For dynamic loads while driving, limit cargo weight to 100 pounds and secure all items with tie-downs to prevent shifting. Some customers install yakima or Thule tracks directly to the cap’s roof using self-tapping screws and sealant.





