






Ford Truck Caps | Premium Custom Fiberglass & Aluminum Caps
Our CX Series represents the gold standard in Ford truck caps, engineered specifically for F-150, F-250, and Super Duty models. We build every CX cap with hand-laid fiberglass construction that's stronger and lighter than competitor alternatives, then finish it with automotive-grade paint matched to your Ford's factory color code.
The CX delivers full standing height inside the bed, giving you walk-in access to cargo and gear. We install weatherproof seals around every door and window, backed by our lifetime leak warranty. Three-point locking handles integrate with your Ford's factory key, so you're never juggling extra sets.
What makes our Ford caps different

Factory Ford Fitment and Installation
Every A.R.E. cap ships with a custom-fit mounting system engineered for your specific Ford model year and bed length. We machine our clamp assemblies to match the exact bed rail profile on F-150, F-250, Super Duty, and Ranger trucks, eliminating the gap and rattles common with universal-fit alternatives.
Our installation kit includes stainless steel clamps, rubber seals molded to Ford bed contours, and a torque-calibrated wrench set. The clamp design allows you to remove and reinstall the cap without damaging the bed rail or paint. We pre-drill all mounting holes during manufacturing, so the cap aligns perfectly with your Ford’s stake pockets and tie-down anchors.

Materials and Construction Process
We hand-lay every fiberglass cap using a multi-stage resin process developed over four decades of manufacturing. The outer skin receives three coats of gel coat before we apply structural fiberglass layers, creating a shell that’s 40% lighter than steel while maintaining superior impact resistance.
Our aluminum DCU frames use 6061-T6 extrusions welded at critical stress points, then reinforced with composite panels bonded using aerospace adhesives. This hybrid construction resists denting from ladder impacts and tool drops better than all-fiberglass or all-aluminum designs. The powder coating process includes a zinc-rich primer that prevents corrosion even when the finish is scratched.
Security Features and Locking Systems
Three-Point Locking Integration
Our premium caps integrate with your Ford’s factory key cylinder using a tumbler system that accepts the same cut pattern. When you lock the cap, three hardened steel rods extend into reinforced strike plates, securing the door at top, bottom, and latch positions simultaneously.
The commercial DCU series adds a secondary deadbolt that operates independently from the handle latch, giving you two-stage security when storing high-value tools overnight. We install the deadbolt cylinder in a recessed housing that resists pry bar attacks and drill-out attempts.



Complete Your Ford With These Custom Cap Solutions
Rated 4.8 by verified buyers





Common Questions About A.R.E. Ford Truck Caps
Yes, all our caps mount directly over Ford factory spray-in bedliners without modification. Our clamp system sits on top of the liner material and distributes pressure across the bed rail rather than crushing the liner edge.
For aftermarket spray-in liners, we recommend installation before the cap goes on so the liner installer can seal properly around the bed rails. If you already have a liner installed, our mounting hardware includes shims that compensate for liner thickness and maintain proper seal compression.
Most truck owners complete installation in 60 to 90 minutes using basic hand tools. Our caps ship with pre-drilled mounting points that align with Ford's factory stake pockets, eliminating the guesswork.
We include detailed instructions with torque specifications for the clamp bolts. If you prefer professional installation, most A.R.E. dealers offer installation services for $150 to $250 depending on your location and cap model.
Yes, our clamp mounting system allows removal and reinstallation without tools in about 15 minutes with two people. The clamps release by loosening four bolts on each side, and the cap lifts straight off the bed rails.
We recommend storing the cap on padded sawhorses or a purpose-built cap rack to protect the finish and seals. The mounting hardware stays attached to the cap, so reinstallation is just a matter of aligning the clamps and retightening the bolts to spec.
We back every fiberglass cap with a lifetime structural warranty covering cracks, delamination, and manufacturing defects. The automotive paint finish carries a 5-year warranty against fading, peeling, and clear coat failure.
Commercial caps in fleet use receive a 3-year warranty on all components including locks, hinges, and windows. Our weatherproof seal system includes a lifetime leak warranty—if water enters through a factory seal, we'll replace the seal and repair any damage at no charge.
Our low-profile V Series and flush-mount Z Series caps actually improve highway fuel economy by 0.5 to 1.2 MPG compared to driving with an open bed. The aerodynamic shell reduces drag from turbulent air in the bed cavity.
Full-height caps like the CX and MX series have minimal impact on fuel economy, typically within 0.3 MPG of baseline. The fiberglass construction keeps weight addition under 200 pounds, so you won't notice reduced acceleration or towing capacity on F-250 and Super Duty models.
Yes, all our caps clear the integrated tailgate step found on 2021 and newer F-150 models. We design the rear door opening to maintain full step deployment without interference.
The cap's rear barn doors or lift gate sit high enough that the step mechanism operates normally. You can still use the step to access cargo inside the cap or climb into the bed with the cap doors open.
The CX Series uses hand-laid fiberglass construction with automotive paint, designed for personal truck owners who want premium finish quality and full standing height. It includes carpeted interior, LED lighting, and a 5-year finish warranty.
The DCU Series combines aluminum framework with composite panels for commercial durability on job sites. It features reinforced locking hardware, powder-coated finish that resists chemicals, and optional side tool boxes. The DCU is built for contractors who need maximum security and impact resistance over aesthetic refinement.





