






Modular Truck Cap | Configurable Design for Work & Recreation
Our modular truck cap gives you a full-height shell with removable side panels, integrated tool storage, and a sliding front window — all in one platform. Whether you're hauling gear to a jobsite or loading camping equipment for the weekend, the same cap reconfigures in minutes without removing it from the bed. We build it with our commercial-grade fiberglass, so durability doesn't flex when versatility does.
The side panels lock in place for secure transport, then lift out when you need open-air access on one or both sides. Roof-mounted tie-down tracks let you add ladder racks or cargo crossbars without drilling new holes, and the rear door opens with a three-point latch that doubles as a work surface when propped horizontal.
Configuration & build specs

Panel system & configuration options
The side panels slide upward on gas struts, then lift clear of the bed rails once the quarter-turn fasteners release. Each panel weighs roughly twenty pounds, so one person can handle removal and reinstallation without help. When both sides come off, you gain the loading clearance of a flatbed while the roof and rear door stay in place to protect tools or covered cargo.
We mount the front window on a horizontal track so it slides left or right without removing the glass. The screen layer stays fixed, which means you can crack the window for airflow on hot days and still keep dust or insects out of the bed. The same sliding mechanism works whether the side panels are installed or removed, so ventilation doesn’t depend on cap configuration.

Roof mounting & accessory integration
Two aluminum tracks run the length of the roof, spaced to match industry-standard crossbar mounts. The tracks accept T-bolt hardware, so ladder racks, kayak carriers, or roof boxes install without drilling through the fiberglass. Each track is rated for three hundred pounds of distributed weight, and the cap’s internal ribbing transfers load to the bed rails rather than relying solely on surface bonding.
The front edge of the roof sits flush with the cab, which eliminates the gap that creates wind noise on taller caps. We shape the roofline to follow the truck’s natural arc, so aerodynamic drag stays close to what you’d see with a standard low-profile truck cap rather than a full commercial shell.
Materials & weatherproofing
Fiberglass construction
We mold the cap from the same gel-coat fiberglass we use on fleet work caps, which resists UV fading and impact damage better than thermoplastic alternatives. The gel coat is paintable, so you can match your truck’s factory color or wrap the cap in vinyl graphics without surface prep beyond a standard clean and scuff.
Seals & drainage
Bulb-style weatherstripping runs the perimeter of each panel and the rear door, compressing against the bed rails and door frame to block water entry. We route a shallow drainage channel along the inside edge of each side opening, so any moisture that does migrate past the seal flows out through weep holes at the rear corners rather than pooling on the bed floor. The carpet headliner wicks minor condensation away from the interior surface, which keeps the ceiling dry during temperature swings.



More truck caps with customizable features
Rated 4.8 by verified buyers







Common questions about modular truck cap design
Two people can install the cap using basic hand tools and the included clamp kit. The process takes about ninety minutes and involves positioning the cap on the bed rails, adjusting front-to-rear alignment, then tightening the clamps from inside the bed. We provide a detailed instruction sheet with torque specs and alignment reference points.
If you prefer professional installation, any A.R.E. dealer can handle the job and typically includes it in the purchase price. Professional fitters will also drill and seal any custom accessory mounts you request at the time of install.
Each roof track is rated for three hundred pounds of distributed weight, which means crossbars, ladder racks, or cargo boxes can total up to six hundred pounds across both tracks. The cap's internal ribbing transfers that load directly to the truck's bed rails, so the fiberglass roof doesn't bear the weight by itself.
Concentrated point loads — like a single heavy object sitting on one crossbar — should stay below one hundred fifty pounds per track to avoid stress cracks. Spread cargo evenly across both crossbars whenever possible.
Each side panel has its own set of quarter-turn fasteners that lock independently. You can remove one panel and leave the other in place, or take both off depending on what you're hauling. The fasteners use a keyed cylinder, so both sides lock with the same key that operates the rear door.
When both panels are installed, the weatherstripping compresses evenly on all sides, maintaining a consistent seal even if only one panel is locked.
We manufacture the modular cap for full-size trucks with bed lengths of five and a half, six and a half, or eight feet. It's compatible with Chevrolet Silverado, GMC Sierra, Ford F-150, Ram 1500, Toyota Tundra, and Nissan Titan models from 2015 onward.
Each cap is built to match your truck's exact bed dimensions and cab height, so you'll need to provide your year, make, model, and bed length when you order. We verify fitment before production begins.
The gel-coat fiberglass accepts automotive paint directly after a light scuff and solvent wipe. Most body shops treat it the same way they'd prep a bumper cover — scuff with 320-grit, clean with wax remover, then spray base coat and clear.
We also offer factory paint matching at the time of order. You provide your truck's paint code, and we spray the cap before it ships. Factory paint adds roughly two weeks to the build time but eliminates the need for a separate paint job.
With both side panels installed, the modular truck cap has nearly the same aerodynamic profile as our standard low-profile models. Most drivers report fuel economy changes within one mile per gallon — either up or down — depending on driving speed and load.
When you remove both side panels, drag increases because airflow hits the open bed sides. Expect a two-to-three mile per gallon drop in highway economy with panels off, though city driving shows minimal difference since wind resistance matters less at lower speeds.
Wash the exterior with car soap and water every few weeks to prevent road grime buildup, and wax the gel coat twice a year to maintain UV protection. Check the weatherstripping every six months for cracks or compression loss, especially around the side panels where repeated removal can accelerate wear.
Lubricate the quarter-turn fasteners and gas strut pivot points with silicone spray once a season. Avoid petroleum-based lubricants, which can degrade the rubber seals. The LED dome light and USB ports are maintenance-free unless a bulb burns out or a port cover breaks.




