





Ram 3500 Truck Cap – Heavy-Duty Camper Shell & Bed Cover
Our Ram 3500 camper shell is purpose-built for the demands of heavy-duty work, weekend hauling, and overland adventure. We engineer every cap with commercial-grade fiberglass reinforced with a full aluminum frame, so it stands up to jobsite wear, harsh weather, and the rigors of towing heavy trailers. The cap mounts directly to your truck bed using a patent-pending twist-lock system that eliminates drilling and preserves your factory paint.
Each unit ships with OE-style paint matched to your truck's VIN and a full-perimeter weather seal that keeps rain, dust, and road spray out of your cargo. Whether you're securing tools overnight, hauling gear cross-country, or converting your bed into a sleeping platform, this cap delivers the strength and weather protection your Ram 3500 deserves.
Heavy-duty build & fit specs

Materials & Construction
We mold every Ram 3500 camper shell from thick-wall fiberglass resin layered over a continuous aluminum frame skeleton. This dual-structure design gives you the corrosion resistance of fiberglass on the outside and the impact strength of aluminum reinforcement inside, so the cap won’t crack when you load plywood sheets or lean a ladder against it.
The roof panel features an integrated drip rail that channels water away from the rear door seals, and the front bulkhead sits flush against your truck’s cab for a factory-installed look. We cure the shell in a heated mold for 48 hours to eliminate voids and ensure consistent wall thickness across the entire unit. Every seam is bonded with marine-grade adhesive and backed by stainless fasteners, so the cap holds its shape even when you’re towing a fifth-wheel or hauling a pallet of block.

Fit & Installation for Ram 3500 Beds
Our cap is contoured to match the exact bed profile of Ram 3500 crew cab models from 2010 forward, including both the standard 6’4″ bed and the long 8′ bed. We use factory bed-rail dimensions and stake-pocket spacing, so the mounting clamps align perfectly without modification. The twist-lock system threads into your existing stake pockets and tightens with a quarter-turn, clamping the cap down with 400 pounds of hold-down force per corner.
Front Bulkhead Seal
The front panel mates to your cab using a closed-cell foam gasket that compresses when you tighten the front clamps. This creates an airtight seal that stops wind noise at highway speed and keeps cab heat from escaping in winter. Installation takes about 90 minutes with two people and no special tools – just a 9/16″ socket and a tape measure to confirm centering before you lock it down.
Door Hardware & Security
We equip the rear opening with two full-height barn doors that swing 170 degrees on stainless-steel piano hinges. Each door locks with a three-point rotary latch – one striker at the top, center, and bottom – so the doors stay sealed even on washboard roads or when you’re backing down a steep boat ramp. The locks are keyed alike and can be matched to your truck’s ignition key on request.
Both side windows slide on nylon rollers in an extruded aluminum track, and each panel locks with a cam latch accessible from inside the cap. The glass is DOT-approved automotive safety glass with a 35-percent tint, so your cargo stays cool in summer sun and out of sight when you park downtown. Every latch, hinge, and roller is replaceable with off-the-shelf hardware – we stock parts for caps we built twenty years ago.



More A.R.E. Caps for Ram Trucks
Rated 4.8 by verified buyers




Ram 3500 Camper Shell Questions
Yes, we manufacture a dually-specific version of this cap that accounts for the wider fender flares and extended bed width on Ram 3500 dual-rear-wheel models. The dually cap uses the same fiberglass construction and mounting system, but the side panels are contoured to clear the outer fenders. When you request a quote, let us know your truck has a dually rear axle and we'll provide the correct part number and pricing.
The dually cap fits both 6'4" and 8' beds on 2010–2025 Ram 3500 models. We use your VIN to confirm bed length and dually configuration before we start the build, so there's no guesswork on fit.
We can match any automotive paint code, including custom colors and aftermarket PPG or DuPont formulas. If your truck has been repainted or has a non-factory color, send us a paint code or a physical color chip and we'll mix a batch for your cap. We spray three coats of base and two coats of clear, then bake the finish at 140 degrees for UV resistance.
For factory Ram colors, we use your VIN to pull the exact color code from the Stellantis database. If you've added a wrap or custom graphics, we can also paint the cap in a solid base color so you can extend the wrap onto the cap after installation.
The roof panel is rated for 300 pounds of evenly distributed static weight, which covers most roof-top tents, kayak racks, and cargo boxes. We reinforce the roof with three lateral aluminum crossbars bonded into the fiberglass, so the load spreads across the entire structure instead of concentrating at the mounting points.
If you're installing a roof-top tent, we recommend using our factory roof-rack system, which bolts through the roof panel into the aluminum frame. The rack distributes weight to six mounting points and is rated for 400 pounds dynamic load. We do not recommend clamping aftermarket racks to the drip rails, as that can deform the edge of the fiberglass over time.
No, the front bulkhead of the cap sits 2 inches forward of the rear cab wall, leaving full clearance for a B&W Companion, Reese Elite, or any under-bed fifth-wheel hitch. The cap does not cover the bed rails where the hitch brackets mount, and the twist-lock clamps install outboard of the hitch footprint.
If you have a flip-over gooseneck ball, the cap's interior height gives you enough room to reach in and operate the latch without removing the cap. We've tested fitment with Curt, Draw-Tite, and PullRite gooseneck systems and confirmed no interference.
The cap weighs approximately 180 pounds depending on bed length, so we recommend two people for safe removal. Once you loosen the eight twist-lock clamps (four per side), the cap lifts straight up off the bed rails with no bolts or fasteners to unfasten. The process takes about ten minutes.
If you need to remove and reinstall the cap frequently, consider our quick-release clamp kit, which replaces the standard twist locks with spring-loaded levers. With the quick-release system, one person can unlock all eight clamps in under a minute, then recruit a helper just for the lift.
Yes, the cap mounts to the top surface of your bed rails, so it's compatible with Line-X, Rhino Lining, or any spray-in liner that covers the bed floor and inner walls. The twist-lock clamps sit on the flat top of the rail where there's no liner material, and the weather seal compresses against the rail's painted or powder-coated surface.
If your liner extends up and over the top edge of the bed rail, you may need to trim it back slightly so the cap's base sits flush. Most professional liner installers leave the top rail surface clean specifically for this reason. We include installation instructions that show exactly where the clamps need to contact bare metal or factory paint.
We back every Ram 3500 camper shell with a 3-year warranty covering fiberglass cracking, paint delamination, and hardware failure under normal use. The warranty includes free replacement of any defective latches, hinges, or weather seals, and we'll repair structural damage caused by manufacturing defects at no charge.
The warranty does not cover damage from accidents, over-loading the roof, or improper installation. If you have our authorized dealer install the cap, we extend the structural warranty to 5 years. We've been building truck caps in the USA since 1969, and we stock replacement parts for every cap we've ever made.





